Yamaha QY 300 страница 131 Скачать руководство пользователя

Страница: 131 / 144

Direct Load

Press the

[F6]

function key (“Load”) from the SONG, PATTERN, PHRASE,

or CHAIN mode to go directly to the corresponding disk load display.

After selecting the file to be loaded and the song, style, or phrase to which it is
to be loaded (there’s no need to specify a destination from the CHAIN mode

since all data is loaded), press the

[ENTER]

key to begin the save operation.

If the specified destination already contains data, the QY300 will ask you

to confirm that you want to overwrite the existing data with the “Delete Old
Data?’ display.

You can use the

[F6]

function key (“Exit”) to

Press the

[+1/YES]

key to go ahead with the load operation, or the

exit from the DISK

[-1/NO]

key to cancel. An “Executing” bar graph will appear while the data is

mode at any time except during

being loaded, then the SONG, PATTERN, PHRASE, or CHAIN mode display

the actual disk operation.

will reappear.

The Disk Mode

In addition to save and load operations, the DISK mode allows you to format
new disks as well as delete and rename existing files.

Press the

[DISK]

mode button to engage the DISK mode.

121

Содержание QY 300

















































































































































Результаты поиска

Содержание QY 300

Отзывы:

Похожие инструкции для QY 300

Бренды по названию

Популярные бренды

Yamaha QY 300, Руководство пользователя

Результаты поиска

Содержание QY 300

Отзывы:

Похожие инструкции для QY 300

Бренды по названию

Популярные бренды