Connecting to a Computer
PSR-E413 Owner’s Manual
87
●
Channel Messages
This instrument is capable of handling 16 MIDI
channels simultaneously—meaning it can play up
to sixteen different instruments at the same time.
Channel messages transmit information such as
Note ON/OFF, Program Change, for each of the 16
channels.
●
System Messages
This is data that is used in common by the entire
MIDI system. System messages include messages
like Exclusive Messages that transmit data unique
to each instrument manufacturer and Realtime
Messages that control the MIDI device.
The following functions become available when this instrument is connected to a computer.
●
Performance data can be transferred between the instrument and the computer (page 88).
●
Files can be transferred between the instrument and the computer (page 90).
The connection procedure is as follows:
1
Install the USB-MIDI driver on your com-
puter.
The USB-MIDI driver is included on the CD-ROM.
Installation of the USB-MIDI driver is described on
page 93.
2
Connect the USB terminal of the computer
to the USB terminal on the instrument using
an AB type USB cable (USB cable sold sep-
arately).
The supplied CD-ROM also includes a Musicsoft
Downloader application that allows you to transfer
song files from your computer to the instrument’s
flash memory. For instructions about how to install
Musicsoft Downloader and how to transfer song
files, see page 91.
■
Precautions when using the USB termi-
nal
When connecting the computer to the USB termi-
nal, make sure to observe the following points.
Failing to do so risks freezing the computer and
corrupting or losing the data. If the computer or the
instrument freezes, restart the application software
or the computer OS, or turn the power to the instru-
ment off then on again.
Message Name
Instrument Operation/Panel Setting
Note ON/OFF
Performance data of the keyboard (contains
note number and velocity data)
Program Change
Instrument selection (including bank select
MSB/LSB, if necessary)
Control Change
Instrument settings (volume, pan, etc.)
Message Name
Instrument Operation/Panel Setting
Exclusive Message
Reverb/chorus settings, etc.
Realtime Messages
Start/stop operation
Connecting a Personal Computer
USB cable
PSR-E413
• Use an AB type USB cable of less than about 3 meters.
• Before connecting the computer to the USB terminal, exit from
any power-saving mode of the computer (such as suspended,
sleep, standby).
• Before turning on the power to the instrument, connect the com-
puter to the USB terminal.
• Execute the following before turning the power to the instrument
on/off or plugging/unplugging the USB cable to/from the USB ter-
minal.
• Quit any open application software on the computer.
• Make sure that data is not being transmitted from the instru-
ment. (Data is transmitted whenever you play on the keyboard
or play back a song, etc.)
• While the computer is connected to the instrument, you should
wait for six seconds or more between these operations: (1) when
turning the power of the instrument off then on again, or (2) when
alternately connecting/disconnecting the USB cable.
CAUTION
Содержание PSRE413 - KEYBOARD USB 100 PATTERNS
Страница 1: ...Owner s Manual DIGITAL KEYBOARD EN ...
Страница 101: ...Scores PSR E413 Owner s Manual 101 ...
Страница 103: ...Scores PSR E413 Owner s Manual 103 ...
Страница 105: ...Scores PSR E413 Owner s Manual 105 ...