PSR-SX600 Reference Manual
19
1
V
oices
Each Voice is linked to its default Voice Set parameter settings (
). Usually these settings are
automatically called up when a Voice is selected. However, you can also disable this feature by the operation
in the relevant display as explained below. For example, if you want to change the Voice yet keep the same
effect, set the EFFECT parameter to OFF (in the display explained below).
1
Call up the operation display.
[MENU]
→
TAB [
E
] Menu1
→
Cursor buttons [
][
][
E
][
F
] Voice Setting
→
[ENTER]
→
TAB [
F
]
Voice Set Filter
2
Use the Cursor buttons [
][
] to select the desired item.
3
Use the [3
]–[8
] buttons to turn each item for the selected Part on or off.
When the button is set to On, the corresponding parameter settings are called up automatically together
with the Voice selection. For information on which parameters are linked to each item, see above.
Disabling Automatic Selection of Voice Sets (Effects, etc.)
Voice
Corresponds to the parameter settings of the Common, Controller, and Sound pages.
Effect
Corresponds to the parameter settings of 1 and 2 in the Effect page.
EQ
Corresponds to the parameter settings of 3 in the Effect page.
Harmony/Arpeggio
Corresponds to the Harmony/Arp page.
3
2
