12
PSR-SX600 Reference Manual
1
Vo
ic
e
s
Detail Setting—Volume function
Assigning the Volume function lets you adjust the volume of the selected parts or channels with the LIVE CON-
TROL knobs. In this example Detail Setting, you can select two or more parts as the target simultaneously for
controlling the corresponding volume levels. You can also select one part as the target; for example, by selecting
only the Audio part as the target to control the volume, the knobs can be used as a volume controller only for the
USB AUDIO PLAYER.
1
Assi
g
n the Volume function to either of the LIVE CONTROL knobs.
For specific instructions, refer to Owner’s Manual, chapter 1.
2
Press the [1
]/[2
] (Detail Settin
g
) buttons to call up the operation display.
3
Use the Cursor buttons [
][
] to select the desired part as the tar
g
et to control, and
then press the [1
]–[8
] buttons to enter a check mark.
4
Press the [EXIT] button to close the operation display.
Detail Setting—Balance function
Assigning the BALANCE function lets you adjust the volume balance between the specified parts and other
parts. In this example Detail Setting, each part can be sent either to the A group or B group. By sending the
sound via external input (a microphone, AUX IN) to the A group and the other parts to the B group, you can
conveniently adjust the relative sound volume balance with the LIVE CONTROL knobs.
1
Assi
g
n the Balance function to either of the LIVE CONTROL knobs.
For specific instructions, refer to Owner’s Manual, chapter 1.
2
Press the [1
]/[2
] (Detail Settin
g
) buttons to call up the operation display.
3
Select the desired part by usin
g
the [2
]–[4
] buttons, and then use the
[5
]/[6
] buttons in order to send the part’s sound to the A
g
roup or B
g
roup.
4
Press the [EXIT] button to close the operation display.
2
2
