Editing Files
POCKETRAK CX Reference Manual
39
Using the fade in and fade out effects
The POCKETRAK CX enables you to apply fade in and fade out effects to the files recorded in
PCM (WAV) format. The fade in effect raises gradually the volume level of the first four seconds of
the file. The fade out effect reduces gradually the volume level of the last four seconds of the file.
IMPORTANT
Once you apply the fade in/fade out effects, you cannot remove the effect. Be sure to backup
important files on a computer or other external device before applying effects.
Applying the fade in effect
1.
While the main screen is displayed, press the [FOLDER/A-B REPEAT] button
located on the side panel repeatedly to select a folder that contains the file
to which you want to apply the fade in effect.
2.
Press the [
]/[
] buttons to select the desired file number, then press
the [EDIT/PHRASE] button located on the side panel.
3.
Press the [VOL +/-] buttons to select [FADE IN],
then press the [MENU/ENTER] button.
4.
Press the [VOL +/-] buttons to select [YES], then
press the [MENU/ENTER] button.
The unit displays the message “FADE IN EXECUT-
ING…”.
Note:
· If you have selected any file other than a PCM file recorded on the unit, or if you have
selected a file of four seconds or less, the unit will display the message “CANNOT FADE
IN!”.
5.
When the unit displays “COMPLETED”, press the
[VOL +/-] buttons to select [AUDITION], then press
the [MENU/ENTER] button.
The unit will play back the file with the fade in effect.
[AUDITION]
You can audition up to about 10 seconds at
the beginning of the file with the fade in effect.
[SAVE]
(Overwrite)
The file with the fade in effect will be saved.
You cannot revert the file to its original status.
(That is, you cannot undo the fade in effect.)
[CANCEL]
The fade in effect will not be applied.
