SETTING THE MENU LIST
16
This section describes the setting menu items available on this unit.
■
Selecting the audio pickup area
(microphone mode)
You can select the audio pickup area of the microphone
during a call. The default setting is “Zone”.
•
Zone
: Pick up the audio from a large area not only
tracking the audio of the talker. It is suitable for a
relatively quiet environment. Use the area select keys
in the “Microphone Mode” menu to specify the audio
pickup area, and then press
. The audio in the area
of the following figure is picked up according to the
pressed keys.
All microphone indicators (blue LED) from the direction
which audio can be picked up light up.
y
• Press
to pick up audio from all directions.
• The possible combinations are [
+
], [
+
],
and all areas.
•
Spot
: Fix the audio pick up area to the front of the
microphone by narrowing the directivity. This mode is
suitable when the number of talkers is limited to one or
two, or when there is equipment that produces noise
such as a projector nearby.
To specify the audio pick up area, use the numeric keys
in the “Microphone Mode” menu. The area shown in
the next figure is enabled or disabled according to the
pressed keys.
Microphone indicators (blue LED) of which direction
audio can be picked up from all light up. This mode
indicated by
on the display.
y
The possible combinations are [
+
], [
+
],
[
+
], and all areas.
•
Track
: The microphone system automatically tracks
and focuses the audio of the talker without fixing the
audio pickup area (only the one talker’s audio can be
picked up at any given time). The audio can be picked
up with narrow directivity so that the noises other than
the taker can be reduced. It is suitable to pick up the
audio clearly in the environment where there are
noises.
SETTING THE MENU LIST
Configuring sound settings
Within 2 m
Within 2 m
Within 2 m
Within 2 m
Within 2 m
Within 2 m
Tracking the talker’s direction automatically
Today...
Next...
01EN_00_PJP-100UH_UCGB.book Page 16 Thursday, October 19, 2006 9:18 AM
