Yamaha NVX GDR155 Скачать руководство пользователя

Страница: 74 / 114

Periodic maintenance and adjustment

10-9

2. Check the spark plug for electrode

erosion and excessive carbon or
other deposits, and replace it if
necessary.

3. Measure the spark plug gap with a

wire thickness gauge and, if nec-
essary, adjust the gap to specifi-
cation.

To install the spark plug

1. Clean the surface of the spark

plug gasket and its mating sur-
face, and then wipe off any grime
from the spark plug threads.

2. Install the spark plug with the

spark plug wrench, and then tight-
en it to the specified torque.

TIP

If a torque wrench is not available
when installing a spark plug, a good
estimate of the correct torque is 1/4–
1/2 turn past finger tight. However, the
spark plug should be tightened to the
specified torque as soon as possible.

3. Install the spark plug cap.

TIP

Install the spark plug cap so that it is
positioned as shown in the illustration
and the spark plug lead does not con-
tact any surrounding parts.

4. Install the panels.

Specified spark plug:

NGK/CPR8EA-9

1. Spark plug gap

Spark plug gap:

0.8–0.9 mm (0.031–0.035 in)

Tightening torque:

Spark plug:

13 N·m (1.3 kgf·m, 9.6 lb·ft)

1. Spark plug cap
2. Spark plug lead

Содержание NVX GDR155



















































































































Результаты поиска

Содержание NVX GDR155

Отзывы:

Похожие инструкции для NVX GDR155

Бренды по названию

Популярные бренды

Yamaha NVX GDR155, Руководство пользователя

Результаты поиска

Содержание NVX GDR155

Отзывы:

Похожие инструкции для NVX GDR155

Бренды по названию

Популярные бренды