Yamaha NVX GDR155 Скачать руководство пользователя

Страница: 63 / 114

Operation and important riding points

9-2

EAU86740

Starting the engine

The ignition circuit cut-off system will
enable starting when the sidestand is
be up.

To start the engine

1. Turn the main switch on.
2. Confirm the indicator and warning

light(s) come on for a few sec-
onds, and the go off. (See page
7-2.)

TIP

Do not start the engine if the en-
gine trouble warning light remains
on.
The ABS warning light should
come on and stay on until the ve-
hicle reaches a speed of 10 km/h
(6 mi/h).

NOTICE

ECA24110

If a warning or indicator light does
not work as described above, have a
Yamaha dealer check the vehicle.

3. Close the throttle completely.
4. While applying the front or rear

brake, push the start switch.

5. Release the start switch when the

engine starts, or after 5 seconds.
Wait 10 seconds before pressing
the switch again to allow battery
voltage to restore.

NOTICE

ECA11043

For maximum engine life, never ac-
celerate hard when the engine is
cold!

EAUN0073

NOTICE

ECAN0072

Do not ride through deep water, oth-
erwise the engine may be damaged.
Avoid puddles because they may be
deeper than expected.

Содержание NVX GDR155



















































































































Результаты поиска

Содержание NVX GDR155

Отзывы:

Похожие инструкции для NVX GDR155

Бренды по названию

Популярные бренды

Yamaha NVX GDR155, Руководство пользователя

Результаты поиска

Содержание NVX GDR155

Отзывы:

Похожие инструкции для NVX GDR155

Бренды по названию

Популярные бренды