14
En
Connections
For the cable connection, follow the orders below.
TV and Blu-ray disc player connection
1
HDMI cable
(optional)
Input the digital audio/
video signals of the Blu-
ray disc player to this
unit.
2
HDMI cable
(optional)
The digital video of the
Blu-ray disc is reflected
on TV.
3
Optical cable
(supplied)
Play back digital sounds
of TV on this unit.
4
Video pin cable
(supplied)
To display the YSP-
2200’s setup menus on
the TV.
•
Do not connect the power cable until all connections are completed.
•
Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug and/or terminal.
1
2
3
INPUT1
HDMI INPUT
OPTICAL
OUTPUT
VIDEO
AUDIO
R
L
HDMI
OUTPUT
To AC wall outlet
Blu-ray disc player
1. Remove the cap
2. Check the direction
of the plug
TV
Video signals
Audio signals
1
2
3
(Example)
1)
4
Subwoofer (supplied)
5
Connect the center unit with the speaker cable
(supplied) to the subwoofer. (
2)
Audio return channel (ARC) supported TV
• Connect HDMI cable to audio return channel supported terminal (the
terminal with “ARC” indicated) on TV. In this case, you do not need
to connect optical cable.
• Activate the HDMI control function of this unit so as to activate audio
return channel (ARC) (
What is audio return channel (ARC)?
A function transmits digital audio signal output from TV to this unit
through a HDMI cable. By this function, a digital audio pin cable to
connect TV and this unit is not needed.
Depending on the setting, HDMI for video signal and optical digital
audio, coaxial digital audio or analog audio for audio signal can be
selected. Refer to “Input assignment (
1)
y
2)
y
