background image

SETTING UP THE SPEAKERS

To mount the speakers on a wall by using

the provided mounting brackets

1

Attach the bracket to the rear of the speaker by
using the provided screws.

2

Remove the provided pads from the backing sheet
and put them at the lower corners of the speakers.

WARNING

Each speaker weighs 3.0 kg (6 lbs. 10 oz.). Do not
mount them on thin plywood or a wall with soft
surface material. If mounted, the screws may
come out of the flimsy surface and the speakers
may fall. This damages the speakers or causes
personal injury.

Do not install the speakers to a wall with nails,
adhesives, or any other unstable hardware. Long-
term use and vibrations may cause them to fall.

To avoid accidents resulting from tripping over
loose speaker cords, fix them to the wall.

3

Fasten screws into a firm wall or wall support as
shown in the figure, and hang the holes of the
mounting bracket on the protruding screws.
* Make sure that the screws are securely caught by

the narrow parts of the holes.

Wall/ wall
support

Tapping screw
(Available at the hardware store)

40 mm

Min.
20 mm

2 mm

Diam. 3.5 to 3.8 mm

You can also use the screw holes on the rear and
the bottom of the speaker for mounting the
speakers on the wall or the ceiling (if you will not
use the provided mounting brackets).

60 mm

64 mm

60 mm

Rear

Bottom

A screw with a diameter of 4 mm
and a pitch of 0.7 mm can be
used. (Depth of hole : 10mm)

Содержание NS-1000MM

Страница 1: ...ecure placement or installation is the owner s responsibility YAMAHA shall not be liable for any accident caused by improper placement or installation of speakers Any time you note distortion reduce the volume control on your amplifier to a lower setting Never allow your amplifier to be driven into clipping Otherwise the speakers may be damaged NS 1000MM Natural Sound 3 way acoustic suspension spe...

Страница 2: ...r any other unstable hardware Long term use and vibrations may cause them to fall To avoid accidents resulting from tripping over loose speaker cords fix them to the wall 3 Fasten screws into a firm wall or wall support as shown in the figure and hang the holes of the mounting bracket on the protruding screws Make sure that the screws are securely caught by the narrow parts of the holes Wall wall ...

Страница 3: ...ION TO YOUR AMPLIFIER BEFORE MAKING CONNECTIONS MAKE SURE THAT THE AMPLIFIER IS SWITCHED OFF Loosen 1 2 3 Connections Connect the screw type input terminals at the rear of the speakers to the speaker output terminals of your amplifier with the provided speaker cables Connect the terminals on both the amplifier and the speakers using one side of the speaker cable Connect the terminals on both compo...

Страница 4: ...10 m x 2 Mounting bracket x 2 Screw x 4 Pad x 4 Please note that all specifications are subject to change without notice Care should be taken not to exceed the input power values noted above Printed in Malaysia V706740 Placing the speakers Place the speakers on a sturdy vibration free surface or speaker stands Better stereo images will be obtained when the speakers are slightly angled in towards t...

Отзывы: