How to Connect:
1
Loosen the terminal knob.
2
Insert the bare wire end properly into the terminal
hole.
[Remove the insulation from both ends of the
speaker cable.]
3
Tighten the knob and secure the cable.
Test the firmness of the connection by pulling
lightly on the cable at the terminal.
10 mm
Speaker (R)
Speaker (L)
Note
Do not let the bare speaker wires touch each other
as this could damage the speaker or the amplifier,
or both of them.
Black (–)
Red (+)
Speaker output
terminals of the
amplifier
Amplifier
CONNECTION TO YOUR AMPLIFIER
BEFORE MAKING CONNECTIONS, MAKE SURE THAT THE AMPLIFIER IS SWITCHED OFF.
Loosen
1
2
3
■
Connections
• Connect the screw-type input terminals at the rear of
the speakers to the speaker output terminals of your
amplifier with the provided speaker cables.
• Connect the (+) terminals on both the amplifier and
the speakers using one side of the speaker cable.
Connect the (–) terminals on both components using
the other side of the cable.
• Connect one speaker to the left (marked L) terminals
of your amplifier, and another speaker to the right
(marked R) terminals, making sure not to reverse the
polarity (+, –). If one speaker is connected with
reversed polarity, the sound will be unnatural and
lack bass.
Tighten