background image

SPECIFICATIONS

Type ......... 3-way acoustic-suspension speaker system

Magnetically shielded type

Driver ................................. 12 cm (4-3/4”) cone woofer

2.5 cm (1”) dome mid-range

1.5 cm (9/16”) dome tweeter

Nominal Impedance ......................................... 6 ohms

Frequency Response .......................... 70 Hz – 24 kHz

Nominal Input Power ............................................ 60W

Maximum Input Power ....................................... 150W

Sensitivity .......................................... 86 dB/2.83V, 1m

Dimensions (W x H x D) .............. 150 x 275 x 180 mm

(5-7/8” x 10-13/16” x 7-1/16”)

Weight .................................... 3.0 kg (6 lbs. 10 oz.) x 2

Accessories ......................... Speaker cable (10 m) x 2

Mounting bracket x 2

Screw x 4

Pad x 4

* Please note that all specifications are subject to

change without notice.

* Care should be taken not to exceed the input power

values noted above.

Printed in Malaysia                V706740

Placing the speakers

• Place the speakers on a sturdy, vibration-free

surface or speaker stands.

• Better stereo images will be obtained when the

speakers are slightly angled in towards the listeners.

Note

These speakers feature a magnetically shielded
design, but there is still a chance that placing
them too close to a TV set might impair picture
color.  Should this happen, move the speakers
away from the TV set.

Содержание NS-1000MM

Страница 1: ...ecure placement or installation is the owner s responsibility YAMAHA shall not be liable for any accident caused by improper placement or installation of speakers Any time you note distortion reduce the volume control on your amplifier to a lower setting Never allow your amplifier to be driven into clipping Otherwise the speakers may be damaged NS 1000MM Natural Sound 3 way acoustic suspension spe...

Страница 2: ...r any other unstable hardware Long term use and vibrations may cause them to fall To avoid accidents resulting from tripping over loose speaker cords fix them to the wall 3 Fasten screws into a firm wall or wall support as shown in the figure and hang the holes of the mounting bracket on the protruding screws Make sure that the screws are securely caught by the narrow parts of the holes Wall wall ...

Страница 3: ...ION TO YOUR AMPLIFIER BEFORE MAKING CONNECTIONS MAKE SURE THAT THE AMPLIFIER IS SWITCHED OFF Loosen 1 2 3 Connections Connect the screw type input terminals at the rear of the speakers to the speaker output terminals of your amplifier with the provided speaker cables Connect the terminals on both the amplifier and the speakers using one side of the speaker cable Connect the terminals on both compo...

Страница 4: ...10 m x 2 Mounting bracket x 2 Screw x 4 Pad x 4 Please note that all specifications are subject to change without notice Care should be taken not to exceed the input power values noted above Printed in Malaysia V706740 Placing the speakers Place the speakers on a sturdy vibration free surface or speaker stands Better stereo images will be obtained when the speakers are slightly angled in towards t...

Отзывы: