SP-10/SP-20 External Speaker
Installation
Connect the supplied cable between the “EXT SPKR” jack on the transceiver and RCA jack
on the SP-10/SP-20.
Note: The figure above shows the
FTDX3000 and SP-20.
Supplied Cable
Adjusting the Front Stand/Legs
SP-10
Simply fold the stand forward to raise the
front of the SP-10, and fold it back against
the bottom case to lower the front of the
SP-10.
SP-20
Pull the front legs outward from the bot-
tom panel, and then rotate the legs count-
er-clockwise to lock them in the extended
position.
Rotate the legs clockwise, and push them
inward. The front feet should now be locked
in the retracted position.
Specifications
SP-10
SP-20
Frequency Range:
250 - 20000 Hz
200 - 18000 Hz
Speaker Diameter:
66 mm
100 mm
Maximum input:
3 watts
7 watts
Impedance:
8 ohms
8 ohms
Case Size (WxHxD): 4.33” x 3.15” x 9.96”
5.12” x 4.53” x 12.28”
(110 x 80 x 253 mm)
(130 x 115 x 312 mm)
Weight (approx.):
2.2 lbs (1.0 kg)
3.75 lbs (1.7 kg)
YAESU MUSEN CO., LTD.
