EAUS1151
Replacing the license plate
light bulb (Depens on
models)
1. Remove the lens by removing the
screw.
1. Screw
2. License plate light bulb socket
2. Remove the burnt out bulb by
pulling it out.
3. Insert a new bulb into the socket.
4. Install the lens by installing the
screw.
NOTICE:
Do not over-
tighten the screw, otherwise
the lens may break.
[ECA11191]
EAU45462
Replacing the auxiliary light
bulb (Depends on models)
If the auxiliary light bulb burns out,
replace it as follows.
1. Place the vehicle on the centers-
tand.
2. Remove cowling A. (See page
6-6).
3. Remove the auxiliary light socket
(together with the bulb) by pulling
it out.
1. Auxiliary light bulb socket
4. Remove the burnt-out bulb by
pulling it out.
1. Auxiliary light bulb
5. Insert a new bulb into the socket.
6. Install the auxiliary light socket
(together with the bulb) by pus-
hing it in.
7. Install the cowling.
PERIODIC MAINTENANCE AND ADJUSTMENT
6-28
6
