NOTICE:
After removing and
installing the main fuse, be
sure to turn the main switch
from “ON” to “OFF” three times
in 3 seconds intervals to initia-
lize the idle speed control sys-
tem.
[ECAT1062]
3. Turn the key to “ON” and turn on
the electrical circuits to check if
the devices operate.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
EAUS1402
Replacing the headlight bulb
If the headlight bulb burns out, repla-
ce it as follows.
ECA10650
Take care not to damage the follo-
wing parts:
G
Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it
free from oil, otherwise the
transparency of the glass, the
luminosity of the bulb, and the
bulb life will be adversely affec-
ted. Thoroughly clean off any
dirt and fingerprints on the
headlight bulb using a cloth
moistened with alcohol or thin-
ner.
G
Headlight lens
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of a
wattage higher than specified.
1. Do not touch the glass part of the bulb.
ECA10670
It is advisable to have a Yamaha
dealer perform this job.
1. Place the scooter on the centers-
tand.
2. Remove cowling A. (See page
6-6).
3. Disconnect the headlight coupler.
NOTICE
NOTICE
Specified fuse:
15.0 A
PERIODIC MAINTENANCE AND ADJUSTMENT
6-25
6
