8. Refill with the specified amount
of the recommended engine oil,
and then install and tighten the oil
filler cap.
ECA11670
G
Do not use oils with a diesel
specification of “CD” or oils of
a higher quality than specified.
In addition, do not use oils
labeled “ENERGY CONSER-
VING II” or higher.
G
Be sure no foreign material
enters the crankcase.
1. Oil filler hole
9. Start the engine, and then let it
idle for several minutes while
checking it for oil leakage. If oil is
leaking, immediately turn the
engine off and check for the cau-
se.
10. Turn the engine off, and then
check the oil level and correct it if
necessary.
To reset the oil change indicator
TIP
The oil change indicator can only be
reset when “Oil Change” appears in
the multi-function display.
1. While the key is turned to “ON”,
hold the button pushed more
than eight seconds.
2. Release the button, and the oil
change indicator will go off.
NOTICE
Recommended engine oil:
See page 8-1
Oil change quantity:
0.78 L (0.82 US qt, 0.69 Imp.qt)
Tightening torque:
Engine oil drain bolt A:
23 Nm (2.3 m•kgf, 16.6 ft•lbf)
Engine oil drain bolt B:
32 Nm (3.2 m•kgf, 23.1 ft•lbf)
PERIODIC MAINTENANCE AND ADJUSTMENT
6-10
6
