manualshive.com logo in svg

Yamaha MU100, Руководство пользователя

Поделиться
Скачать
Yamaha MU100 Скачать руководство пользователя страница 58

60

Guided Tour

All Part Controls

You can make changes to the overall Performance by using the All Part
controls. These are displayed in the Performance Play mode, and give you
at-a-glance confirmation and control of some important basic settings of the
selected Performance.

In the Performance mode, the All Part controls are automatically called

up whenever you turn the power on or select the Performance mode.

Let’s take a look at the All Part Performance Play display:

       PART         MIDI      BANK/PGM#  VOL 

 

EXP  PAN 

 

 REV CHO  VAR    KEY

For more information on the All Part controls, see page 120.

Performance name, bank (Preset or Internal), and
program number.

System Transpose
(key transpose
setting for entire
Performance).

Reverb Return.

Variation Return.

Performance Pan
(stereo position of entire Performance).

Expression
(not available; always set to maximum).

System Channel (MIDI receive channel for entire Performance).

Performance Volume.

Indicates All Part control.

Chorus Return.

Editing in the Performance Mode

Содержание MU100



















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды