manualshive.com logo in svg

Yamaha MU100, Руководство пользователя

Поделиться
Скачать
Yamaha MU100 Скачать руководство пользователя страница 41

Guided Tour

43

About the Modes — Multi and Performance

The MU100 has two main operating modes: Multi and Performance. You used
the Performance mode earlier when playing Performances — playing four
Voices over one MIDI channel. The Multi mode is primarily used in sequencer
and computer music applications, since it allows you to play all 32 Parts inde-
pendently over different MIDI channels.

Which mode the MU100 is set to depends on the selected Sound Module

mode. The XG, TG300B and C/M settings are all Multi mode. When PFM is
selected, the MU100 is in the Performance mode.

Selecting Voice Banks and Voices From the Panel

Operation

1

Select a Part.
Use the 

[PART 

-

/

+

]

 buttons. Depending on the selected Part,

one of the displays below will appear:

• For Parts 1 – 16 and the A/D Parts:

• For Parts 17 – 32:

For this example, select Part 1. Press the appropriate button until
“01” appears in the PART section of the display.

Selecting and Playing Individual Voices

Содержание MU100



















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды