manualshive.com logo in svg

Yamaha MU100, Руководство пользователя

Поделиться
Скачать
Yamaha MU100 Скачать руководство пользователя страница 20

22

The MU100 — What It Is and What It Can Do

The MU100 — What It Is and What It Can Do

About the Modes of the MU100

The MU100 has two main operating modes: Multi and Performance. In Multi
mode, the MU100 is a 32-Part multi-timbral tone generator; in Performance
mode, the MU100 effectively functions as four tone generators controlled
over a single MIDI channel.

Which mode the MU100 is in depends on the selected Sound Module

mode. If XG, TG300B or C/M are selected, the MU100 automatically sets
itself to the Multi mode. When PFM is selected, the MU100 is in the Perfor-
mance mode. (For information on selecting the Sound Module mode, see
page 156.)

Each mode provides compatibility with different music software and hard-

ware.

XG:

This mode provides the full potential of the MU100, giving you
access to the 1074 XG Voices.

TG300B:

This mode provides compatibility with the GM-B mode of the
TG300 Tone Generator.

C/M:

This mode provides compatibility with most computer music soft-
ware not supported by the other two Multi modes.

PFM:

This mode (Performance) lets you play four Voices simultaneously
over a single MIDI channel.  (For more information on using the
Performance mode, see page 39.)

The bottom right of the display indicates the currently selected Sound Mod-
ule mode.

           Selected Sound Module mode.

NOTE

When set to the 

TG300B

 mode, the MU100 may not be able to play TG300-specific

song data with complete accuracy. However, MIDI data designed for other com-
puter music tone generators is compatible with the MU100.

XG
TG300B
C/M
PERFORM

Содержание MU100



















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды