Example 4) A system using Dante
MTX Setup Manual
99
INPUT settings
Make the following input settings.
Port select button
When you click this, the “Input Patch” dialog box will open. This example
makes the following changes to the default settings.
Port / External Device parameter
access button
This lets you make input connector settings
for the MTX and EXi8. When you click the
button, a popup window will appear. Make
the desired settings, and then in the upper
right, click × to close the popup window.
The appropriate gain level will depend on
the devices that are connected, so set the
level appropriately for your devices.
For CH1, make settings for input connector
1 of the EXi8. The gain of the EXi8 is set to
-6 dB by default.
Because condenser microphone is connected to CH1, leave the gain at 30 dB and
turn phantom power on.
[ON] button
This turns the channel on/off. You should turn off unused channels.
Fader
This adjusts the input level. Leave the fader at -∞ until the system goes online.
Channel name
You can double-click this to edit the name.
In this example, names have been assigned as follows.
CH1
Signal from the main mic of System A, connected to the EXi
8
CH
9
Signal from the main mic of System B
CH
10
System B signal other than the main mic
STIN1 L/R
Signal from the CD player connected to ST I
N
1
STIN
2
L/R
Signal from the background music player connected to ST I
N
2
STIN
3
L/R
SD player built into the MTX5-D
CH1
YDIF [1] (System A main mic connected to the EXi
8
)
CH
9
DA
N
TE [9] (Signal from the system B main mic)
CH
10
DA
N
TE [10] (System B signal other than the main mic)
CH1
Main Mic
CH
9
Sys B9
CH
10
Sys B10
STIN1
CD Player
STIN2
BGM
STIN3
SD Player
Port select button
Port / External
Device parameter
access button
[O
N
] button
Fader
Channel name
