Instrument an
d
control functions
5-14
5
BC
The brake control system has two set-
tings, BC1 and BC2. Select BC1 when
only standard ABS is desired. Select
BC2 to have the brake control system
further regulate brake pressure while
cornering to suppress lateral wheel
slip.
TIP
For skilled riders and when riding at the
track, due to varying conditions, the
BC2 brake system may engage sooner
than expected relative to your desired
cornering speed or intended cornering
line.
Quick shifter
The quick shifter indicators are divided
into QS
and QS
sections. QS
and QS
are not linked and can be in-
dependently turned on or off.
The quick shifter can be set to ON or
OFF.
OFF turns the respective upshift or
downshift function off, and the clutch
lever must then be used when shifting
in that direction.
TIP
If the quick shifter setting cannot be
changed: turn the engine off with the
gear position set to neutral, then
change the setting.
“Shift In
d
icator”
This module allows a custom shift indi-
cator to be set. When the engine r/min
(rotations per minute) are in the speci-
fied range, the gear indicator will flash.
This module has 3 options:
“IND Mode” - the shift indicator can be
turned ON/OFF
“IND Start” - the r/min at which the in-
dicator starts flashing can be chosen.
Once selected, rotate the wheel switch
up/down to increase or decrease the
r/min value by increments of 200 r/min.
“IND Start” is settable between 6000 -
12800 r/min.
“IND Stop” - the r/min at which the in-
dicator stops flashing can be chosen.
Once selected, rotate the wheel switch
up/down to increase or decrease the
MPH
BC Setting
BC
2
MPH
QS Setting
Q
S
ON
Q
S
ON
MPH
S
hift Indicator
IND Mode
ON
IND
S
tart
8000 r/min
IND
S
top
10000 r/min
UBAM11E0.book Page 14 Wednesday, September 8, 2021 1:00 PM
Содержание MT09SPN
Страница 120: ...DIC183 PRINTED IN JAPAN 2021 09 0 3 1 CR E...