Yamaha MT09SPN, Руководство пользователя

Страница: 53 / 120

Instrument an d control functions
5-28
5
TIP

When turning the damping force
adjuster in direction (a), the 0 click
position and the 1 click position
may be the same.

When turning the damping force
adjuster in direction (b), it may
click beyond the stated specifica-
tions, however such adjustments
are ineffective and may damage
the suspension.
Compression d ampin g force
Turn the adjusting knob in direction (a)
to increase the compression damping
force.
Turn the adjusting knob in direction (b)
to decrease the compression damping
force.
To set the compression damping
force, turn the adjuster in direction (a)
until it stops, and then count the clicks
in direction (b).
TIP

When turning the damping force
adjuster in direction (a), the 0 click
position and the 1 click position
may be the same.

When turning the damping force
adjuster in direction (b), it may
click beyond the stated specifica-
tions, however such adjustments
are ineffective and may damage
the suspension.
WARNING
EWA10222
This shock a b sor b er assem b ly con-
tains hi g hly pressurize d nitro g en
g as. Rea d an d un d erstan d the fol-
lowin g information b efore han d lin g
the shock a b sor b er assem b ly.

Do not tamper with or attempt
to open the cylin
d er assem b ly.

Do not su b ject the shock a b -
sor b er assem b ly to an open
flame or other hi g h heat source.
This may cause the unit to ex-
plo
d e d ue to excessive g as
pressure.

Do not d eform or d ama g e the
cylin d er in any way. Cylin d er
d ama g e will result in poor
d ampin g performance.

Do not d ispose of a d ama g e d or
worn-out shock a b sor b er as-
sem b ly yourself. Take the shock
a b sor b er assem b ly to a Yamaha
d ealer for any service.
1. Compression damping force adjusting knob
Compression d ampin g settin g :
Minimum (soft):
20 click(s) in direction (b)
Standard:
10 click(s) in direction (b)
Maximum (hard):
0 click(s) in direction (b)
1 1
(b) (b)
(a) (a)
1
(b)
(a)
UBAM11E0.book Page 28 Wednesday, September 8, 2021 1:00 PM