Yamaha MT09SPN, Руководство пользователя

Страница: 49 / 120

Instrument an d control functions
5-24
5
EAU46833
Han d le b ar position
The handlebar can be adjusted to one
of two positions to suit the rider’s pref-
erence. Have a Yamaha dealer adjust
the position of the handlebar.
EAU91640
A d justin g the front fork
WARNING
EWA10181
Always a d just b oth fork le g s equally,
otherwise poor han d lin g an d loss of
sta b ility may result.
This front fork is equipped with spring
preload adjusting bolts, rebound
damping force adjusting screws, com-
pression damping force adjusting bolts
(for fast compression damping) and
compression damping force adjusting
bolts (for slow compression damping).
NOTICE
ECA22472

Use extra care to avoi d scratch-
in g the ano d ize d finish when
makin g suspension a d just-
ments.

To avoi d d ama g in g the suspen-
sion’s internal mechanisms, d o
not attempt to turn b eyon d the
maximum or minimum settin g s.
Sprin g preloa d
Turn the adjusting bolt in direction (a)
to increase the spring preload.
Turn the adjusting bolt in direction (b)
to decrease the spring preload.
The spring preload setting is deter-
mined by measuring distance A,
shown in the illustration. The shorter
distance A is, the higher the spring pre-
load; the longer distance A is, the lower
the spring preload.
1. Handlebar
1
1. Spring preload adjusting bolt
(b)
1 1 1
(a) (b) (a)
UBAM11E0.book Page 24 Wednesday, September 8, 2021 1:00 PM