Yamaha MT-10 SP 2016, Руководство пользователя

Страница: 100 / 118

Periodic maintenance and adjustment
7-34
1
2
3
4
5
6
7
8
9
10
11
12
If a fuse is blown, replace it as follows.
1. Turn the key to “OFF” and turn off
the electrical circuit in question.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage.
WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
[EWA15132]
3. Turn the key to “ON” and turn on
the electrical circuit in question to
check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
Specified fuses:
Main fuse:
50.0 A
Terminal fuse 1:
2.0 A
Headlight fuse:
10.0 A
Signaling system fuse:
7.5 A
Ignition fuse:
15.0 A
Radiator fan motor fuse:
15.0 A
Sub radiator fan motor fuse:
10.0 A
ABS motor fuse:
30.0 A
Hazard fuse:
7.5 A
ABS ECU fuse:
7.5 A
ABS solenoid fuse:
10.0 A
SCU fuse:
7.5 A
Fuel injection system fuse:
15.0 A
Backup fuse:
7.5 A
Electronic throttle valve fuse:
7.5 A
Brake light fuse:
1.0 A
Cruise control fuse:
1.0 A
BW8-9-E0_1.book 34 ページ ２０１６年１２月１３日 火曜日 午前１０時３９分