![background image](http://html.mh-extra.com/html/yamaha/motif6-voice-editor/motif6-voice-editor_owners-manual_903191280.webp)
280
MOTIF Appendix
Troubleshooting
Appendix
Pitch or intervals are wrong.
• Is the Master Tune parameter in the Utility mode set at a value other than “0”?
• Is the Note Shift parameter in the Utility mode set at a value other than “0”?
• When the voice produces a wrong pitch, is the appropriate tuning system selected from Micro Tuning parameter
in the Voice Edit mode?
• When the voice produces a wrong pitch, is the LFO Pitch Modulation Depth in the Voice Edit mode set too high?
• When the performance produces a wrong pitch, is the Note Shift parameter of each part set at a value other than “0”?
• When the performance produces a wrong pitch, is the Detune parameter of each part set at a value other than “0”?
• When the song/pattern playback produces a wrong pitch, is the Note Offset parameter in the Groove display set
at a value other than “0”?
Only one note sounds at a time.
• Is the Mono/Poly parameter in the Voice mode set to “mono”?
No effect is applied.
• Is the [EFFECT BYPASS] button turned off?
• Have the [REVERB] and [CHORUS] buttons been turned fully counter-clockwise (to the minimum)?
• Have any or all of the elements’ Effect Output parameter been set to “thru”?
• Have any or all of the effect types been set to “thru” or “off” (in the Effect display of the Voice Edit mode)?
Song/Pattern cannot be started.
• Does the selected song or pattern (phrase) contain data?
• Is the Remote Control turned on?
• Is the MIDI sync parameter set to MIDI (using external clock) in the Utility mode?
Song/Pattern (Phrase) cannot be recorded.
• Is there enough free memory for recording? The total MOTIF memory capacity determines the number of
songs/patterns (phrases) that can be recorded. For example, if the memory contains songs/patterns (phrases)
that use up a large amount of memory, the memory may become full even though the available pattern or song
numbers are not all used.
• In the Pattern Record mode, does the specified track to which the Phrase is assigned have preset data?
Recording cannot be done to a track that contains preset data.
Can’t record samples.
• Have you exceeded the maximum allowable number of samples (key banks)?
• Is there enough free sample memory?
• Is the Sampling Source setting appropriate?
• Is the Trigger mode set appropriately?
Can’t save data to the Memory card or the SCSI disk.
• Is the Memory card or SCSI disk being used write protected? (Write-protect should be set to off for saving data.)
• Is the Memory card or SCSI disk being used properly formatted?
MIDI bulk data transmission/reception won’t work properly.
• Is the Receive Bulk parameter set to “protect” in the Utility mode?
Plug-in board does not work.
• Is the lamp of the corresponding slot number to which the Plug-in board has been installed lit?
• Has the Vocal Harmony Plug-in board been installed to slot 2 or 3 ? (The VH board should be installed to slot 1.)
• Has the Multi-part Plug-in board been installed to slot 1 or 2 ? (The Multi-part Plug-in board should be installed to slot 3.) page 282
Содержание MOTIF6 Voice Editor
Страница 1: ...06E0 ...
Страница 300: ...202MWAP15 2 06E0 ...