manualshive.com logo in svg

Yamaha MOTIF6 Voice Editor, Руководство пользователя

Редактор голоса Yamaha MOTIF6 обеспечивает возможность загрузки бесплатных обновлений прошивки и руководств. Управляйте звуком своего устройства, загружая необходимые ресурсы с manualshive.com. Получите доступ к дополнительным функциям и настройкам, улучшайте свой опыт работы с музыкальным оборудованием.

Поделиться
Скачать
background image

258

MOTIF  Reference

Utility mode

Reference

  

Utility mode

[F5] MIDI settings

●

 [F5]-[SF1] MIDI  Channel

From this display you can make basic MIDI settings.

• BasicRcvCh (Basic Receive Channel)

Determines the MIDI channel over which the MOTIF 
receives MIDI data (from an external sequencer, MIDI 
controller, or other device). This parameter is available for 
the Voice / Performance mode.

❏

Settings

1~16, omni (all channels), off

• KBDTransCh (Keyboard Transmit Channel)

Determines the MIDI channel over which the MOTIF 
sends MIDI data (to an external sequencer, tone generator, 
or other device). This parameter is available for the Voice / 
Performance mode.

❏

Settings

1~16, off

n

In the Song/Pattern mode, the MIDI data created by playing 
the keyboard/knobs/wheels is sent to the tone generator 
block or the external MIDI devices via the MIDI output 
channel of the currently selected track (page 38).

• DeviceNo. (Device Number)

Determines the device number used by the MOTIF in 
receiving or transmitting data. This number must match 
the Device Number of the external MIDI device when 
transmitting/receiving bulk data, parameter changes or 
other system exclusive messages to/from it. 

❏

Settings

1~16, all, off

• FileUtilID (File Utility ID)

This determines the ID number used in conjunction with 
file transfers using the special File Utility software in the 
included CD-ROM.  This File Utility ID number and the 
Device Number (above) must match the ones of the the 
File Utility software in order to properly transfer files 
between the MOTIF and a connected computer.

❏

Settings: 1~128

●

 [F5]-[SF2] MIDI  Switch

From this display you can determine which types of 
MIDI data the MOTIF transmits and responds to.

• BankSel

This switch enables or disables Bank Select messages, both 
in transmission and reception.  When this is set to “on,” 
the MOTIF responds to incoming Bank Select messages, 
and it also transmits appropriate Bank Select messages 
(when using the panel).

❏

Settings

off, on

• PgmChange (Program Change)

This switch enables or disables Program Change messages, 
both in transmission and reception.  When this is set to 
“on,” the MOTIF responds to incoming Program Change 
messages, and it also transmits appropriate Program 
Change messages (when using the panel).

❏

Settings

off, on

• CtrlChange (Control Change mode)

This parameter lets you set the MOTIF to properly 
respond to either type of GM System data, Level 1 or Level 
2 — particularly regarding AEG Sustain.  When using GM 
Level 2, set this to Mode 1, and the MOTIF responds to the 
messages as parameter change data.  When using GM 
Level 1, set this to Mode 2, and the MOTIF responds to the 
messages as control change data.  

❏

Settings

mode1, mode2

• LocalCtrl (Local Control On/Off)

This determines whether or not the tone generator of the 
MOTIF responds to your keyboard playing.  Normally, this 
should be set to “on” — since you’ll want to hear the 
sound of the MOTIF as you play it.  However, for external 
sequencer applications, you may need to set this to “off” to 
avoid getting “double” notes, in which the tone generator 
of the MOTIF is played twice — once by the keyboard and 
once again by the keyboard data routed through the 
sequencer.
Even if this is set to “off,” the data will be transmitted 
through the MIDI OUT or USB terminal. Also, the 
MOTIF’s tone generator block will respond to messages 
received via the MIDI IN or USB terminal. 

❏

Settings

off, on

• RcvBulk (Receive Bulk)

Determines whether or not Bulk Dump data can be 
received.

❏

Settings

protect (not received), on (received)

●

 [F5]-[SF3] MIDI  Sync

From this display you can set various parameters 
related to MIDI clock and synchronization.

• MIDI Sync

Determines whether Song/Pattern/Arpeggio playback will 
be synchronized to the MOTIF’s internal clock or an 
external MIDI clock. 

❏

Settings

internal, MIDI, MTC

internal
Synchronization to internal clock. Use this setting when 
the MOTIF is to be used alone or as the master clock 
source for other equipment. 

MIDI
The MOTIF is synchronized to a MIDI clock received 
from an external MIDI device via the MIDI IN or USB 
terminal. 

Содержание MOTIF6 Voice Editor













































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MOTIF6 Voice Editor

F-SECURE Mobile Anti-Virus 60 Series User Manual preview
Mobile Anti-Virus 60 Series
Бренд: F-SECURE Страницы: 90
Red Hat ENTERPRISE VIRTUALIZATION FOR DESKTOPS Solution Manual preview
ENTERPRISE VIRTUALIZATION FOR DESKTOPS
Бренд: Red Hat Страницы: 14
Juniper JUNOS PUS MOBILE SECURITY SUITE Datasheet preview
JUNOS PUS MOBILE SECURITY SUITE
Бренд: Juniper Страницы: 6
McAfee VIRUSSCAN HOME EDITION 7.0 Manual preview
VIRUSSCAN HOME EDITION 7.0
Бренд: McAfee Страницы: 56
Nortel Contivity VPN Client User Manual preview
Contivity VPN Client
Бренд: Nortel Страницы: 90
IBM ZVSE PARALLEL ACCESS Manual preview
ZVSE PARALLEL ACCESS
Бренд: IBM Страницы: 10
Pioneer Serato Flip User Manual preview
Serato Flip
Бренд: Pioneer Страницы: 11
Autodesk AutoCAD Civil 3D 2013 User Manual preview
AutoCAD Civil 3D 2013
Бренд: Autodesk Страницы: 25
Autodesk ALIAS DESIGN Brochure preview
ALIAS DESIGN
Бренд: Autodesk Страницы: 12
Autodesk 235B1-05A761-1301 - AutoCAD MEP 2010 User Manual preview
235B1-05A761-1301 - AutoCAD MEP 2010
Бренд: Autodesk Страницы: 878
Autodesk AUTOCAD 2006 Command Reference Manual preview
AUTOCAD 2006
Бренд: Autodesk Страницы: 1490
Techniques Avancees CODESOFT Sentinel Print Pack User Manual preview
CODESOFT Sentinel Print Pack
Бренд: Techniques Avancees Страницы: 50
Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3 Manual preview
ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3
Бренд: Intel Страницы: 1898
AMX AXCENTWire Instruction Manual preview
AXCENTWire
Бренд: AMX Страницы: 24
Tech Source RAPTOR 2500T-DL - RAPTOR OPENWINDOWS FOR SOLARIS INSTALLATION AND Brochure preview
RAPTOR 2500T-DL - RAPTOR OPENWINDOWS FOR SOLARIS INSTALLATION AND
Бренд: Tech Source Страницы: 2
FieldServer FS-8700-64 Driver Manual preview
FS-8700-64
Бренд: FieldServer Страницы: 22
pagertec DELUX Installation Instructions Manual preview
DELUX
Бренд: pagertec Страницы: 16
MACROMEDIA FLASH 8-EXTENDING FLASH Manual preview
FLASH 8-EXTENDING FLASH
Бренд: MACROMEDIA Страницы: 554

Бренды по названию

Популярные бренды

Загрузить еще бренды