manualshive.com logo in svg

Yamaha MOTIF6 Voice Editor, Руководство пользователя

Редактор голоса Yamaha MOTIF6 обеспечивает возможность загрузки бесплатных обновлений прошивки и руководств. Управляйте звуком своего устройства, загружая необходимые ресурсы с manualshive.com. Получите доступ к дополнительным функциям и настройкам, улучшайте свой опыт работы с музыкальным оборудованием.

Поделиться
Скачать
background image

15

MOTIF  The Controls & Connectors

 Front Panel

The Control & Connectors

™

[ENTER] button

Use this button to execute a Job or a Store 
operation. Also use this button to actually enter a 
number when selecting a Memory or Bank for Voice 
or Performance. In the File mode, use this button to 
go to the next lowest level in the selected directory. 

£

SLOT 1-3 lamps (page 282)

These three lamps show the installation status of 
the Plug-in Boards. 
If the Plug-in Board has been correctly installed, the 
corresponding SLOT lamp will light.

n

The Vocal Harmony Plug-in Board (PLG100-VH) 
can be installed only to slot 1. It cannot be installed 
to slot 2 or 3.

n

The Multi part Plug-in Board (PLG100-XG) can be 
installed only to slot 3. It cannot be installed to slot 
1 or 2.

¢

BANK buttons (page 124)

Each button selects a Voice or Performance Bank.
When the [CATEGORY SEARCH] button is turned 
on, these buttons can be used to select the desired 
category (printed below each button). When the 
[SECTION] button is turned on in the Pattern 
mode, these buttons are used to select the desired 
section. 

∞

GROUP [A] - [H] buttons (page 124)

Each button selects a Voice or Performance Group.
When the [CATEGORY SEARCH] button is turned 
on, these buttons can be used to select the desired 
category (printed below each button). When the 
[SECTION] button is turned on in the Pattern 
mode, these buttons are used to select the desired 
section. 

§

NUMBER [1] - [16] buttons (page 124)

Use of these buttons differs depending on the on/off 
status of the [TRACK SELECT] and [MUTE] 
buttons. 

[CATEGORY SEARCH] button (page 126)

When this button is turned on in the Performance 
mode, the [BANK] and [GROUP] buttons can be 
used to select the Performance category. 
When this button is turned on in another mode, the 
[BANK] and [GROUP] buttons can be used to select 
the Voice category. 

•

[SECTION] button (page 218)

When this button is turned on in the Pattern mode, 
the [BANK] and [GROUP] buttons can be used to 
select the Pattern Section. 

ª

[TRACK SELECT] button (page 181)

Turning this button on in the Song/Pattern mode 
enables the NUMBER [1] - [16] buttons for 
selecting corresponding Song/Pattern tracks. The 
on/off status of this button affects the NUMBER [1] 
- [16] buttons in different ways, depending on the 
selected mode. (See 

§

 “NUMBER [1] - [16] 

buttons” above.)

‚

[MUTE] button (page 180)

Turning this button on in the Song/Pattern mode 
enables the NUMBER [1] - [16] buttons for muting 
corresponding Song/Pattern tracks. 
Press one of the NUMBER [1] - [16] buttons while 
holding this button to solo the corresponding track 
of the current selected Song/Pattern. 
The on/off status of this button affects the 
NUMBER [1] - [16] buttons in different ways, 
depending on the selected mode. (See 

§

 “NUMBER 

[1] - [16] buttons” above.)

Functions of the NUMBER [1] - [16] buttons

When [TRACK 

SELECT] is on

When [MUTE] 

is on

When both 

[TRACK SELECT] 

[MUTE] are off

Voice Play mode

Keyboard transmit 
channel setting

—

Voice selection, 
according to Groups 
A - H

Voice Edit mode

Element selection(1 - 4) and Element 
Mute setting(9 - 12)

—

Performance Play 
mode

Keyboard transmit 
channel setting

Performance part 
Mute setting 
(1 - 4)

Performance or 
Voice selection (if 
cursor is located at 
Voice name), 
according to Groups 
A - H 

Performance Edit 
mode

Performance part 
selection (1 - 4)

Master Play mode

Zone selection 
(1 - 4)

—

Master selection, 
according to Groups 
A - H

Master Edit mode

Zone selection 
(1 - 4)

Zone Mute setting 
(1 - 4)

—

Song/Pattern  
mode

Song/Pattern 
track selection

Song/Pattern 
track Mute setting Song/Style selection, 

according to Groups 
A - H

Song/Pattern 
Mixing mode

Song/Pattern part 
selection

Song/Pattern part 
Mute setting

Содержание MOTIF6 Voice Editor













































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MOTIF6 Voice Editor

Panasonic Workio DP-2310 Operating Instructions Manual preview
Workio DP-2310
Бренд: Panasonic Страницы: 20
Canon PowerShot A590 IS Software User'S Manual preview
PowerShot A590 IS
Бренд: Canon Страницы: 49
MAGIX VIDEO EASY3hd Manual preview
VIDEO EASY3hd
Бренд: MAGIX Страницы: 88
Sony Ericsson Controller Mode Application Note preview
Controller Mode
Бренд: Sony Ericsson Страницы: 10
F-SECURE ANTI-VIRUS LINUX CLIENT SECURITY - Administrator'S Manual preview
ANTI-VIRUS LINUX CLIENT SECURITY -
Бренд: F-SECURE Страницы: 208
Seagate ST905003BPA1E1-RK - Maxtor BlackArmor 500 GB External Hard Drive Specifications preview
ST905003BPA1E1-RK - Maxtor BlackArmor 500 GB External Hard Drive
Бренд: Seagate Страницы: 2
Billion BiGuard C01 Quick Installation Manual preview
BiGuard C01
Бренд: Billion Страницы: 18
AMX Modero NXD-1000Vi Datasheet preview
Modero NXD-1000Vi
Бренд: AMX Страницы: 2
AVG ANTI-VIRUS 9 FREE - REV 90.15 User Manual preview
ANTI-VIRUS 9 FREE - REV 90.15
Бренд: AVG Страницы: 146
Symantec NORTON INTERNET SECURITY - FOR MAC V4 User Manual preview
NORTON INTERNET SECURITY - FOR MAC V4
Бренд: Symantec Страницы: 28
Symantec CONFLICTMANAGER Reference preview
CONFLICTMANAGER
Бренд: Symantec Страницы: 54
3Com CommWorks 5210 User Manual preview
CommWorks 5210
Бренд: 3Com Страницы: 144
UNIBLUE DriverScanner 2010 Product Manual preview
DriverScanner 2010
Бренд: UNIBLUE Страницы: 12
Qlogic SANsurfer FC HBA Manager User Manual preview
SANsurfer FC HBA Manager
Бренд: Qlogic Страницы: 152
Navman F-Series F20 Manual Del Usuario preview
F-Series F20
Бренд: Navman Страницы: 10
Xerox FreeFlow 701P45570 Integration Manual preview
FreeFlow 701P45570
Бренд: Xerox Страницы: 12
Raymarine RayTech RNS 5.0 Getting Started preview
RayTech RNS 5.0
Бренд: Raymarine Страницы: 46
Canon 40D - EOS 40D DSLR Software User'S Manual preview
40D - EOS 40D DSLR
Бренд: Canon Страницы: 50

Бренды по названию

Популярные бренды

Загрузить еще бренды