manualshive.com logo in svg

Yamaha MOTIF6 Voice Editor, Руководство пользователя

Редактор голоса Yamaha MOTIF6 обеспечивает возможность загрузки бесплатных обновлений прошивки и руководств. Управляйте звуком своего устройства, загружая необходимые ресурсы с manualshive.com. Получите доступ к дополнительным функциям и настройкам, улучшайте свой опыт работы с музыкальным оборудованием.

Поделиться
Скачать
background image

 

INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK, 

AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST.

WARNING-

 

  When using any electrical or electronic product,

basic precautions should always be followed. These precautions
include, but are not limited to, the following:

 

1.

 

 

 

Read all Safety Instructions, Installation Instructions, Special

Message Section items, and any Assembly Instructions found in
this manual BEFORE making any connections, including
connection to the main supply.

 

2.

 

 

Do not attempt to service this product beyond that

described in the user-maintenance instructions. All other servicing
should be referred to qualified service personnel.

 

3.

 

 

 

Main Power Supply Verification: Yamaha products are

manufactured specifically for the supply voltage in the area where
they are to be sold. If you should move, or if any doubt exists about
the supply voltage in your area, please contact your dealer for
supply voltage verification and (if applicable) instructions. The
required supply voltage is printed on the name plate. For name
plate location, please refer to the graphic found in the Special
Message Section of this manual.

 

4.

 

 

 

DANGER

 

-Grounding Instructions: This product must be

grounded and therefore has been equipped with a three pin
attachment plug. If this product should malfunction, the ground pin
provides a path of low resistance for electrical current, reducing the
risk of electrical shock. If your wall socket will not accommodate this
type plug, contact an electrician to have the outlet replaced in
accordance with local electrical codes. Do NOT modify the plug or
change the plug to a different type!

 

5.

 

 

 

WARNING

 

: Do not place this product or any other objects

on the power cord or place it in a position where anyone could walk
on, trip over, or roll anything over power or connecting cords of any
kind. The use of an extension cord is not recommended! If you must
use an extension cord, the minimum wire size for a 25’ cord (or less)
is 18 AWG. NOTE: The smaller the AWG number, the larger the
current handling capacity. For longer extension cords, consult a
local electrician.

 

6.

 

 

Ventilation: Electronic products, unless specifically

designed for enclosed installations, should be placed in locations
that do not interfere with proper ventilation. If instructions for
enclosed installations are not provided, it must be assumed that
unobstructed ventilation is required.

 

7.

 

 

Temperature considerations: Electronic products should be

installed in locations that do not seriously contribute to their
operating temperature. Placement of this product close to heat
sources such as; radiators, heat registers etc., should be avoided.

 

8.

 

 

This product was NOT designed for use in wet/damp

locations and should not be used near water or exposed to rain.
Examples of wet /damp locations are; near a swimming pool, spa,
tub, sink, or wet basement.

 

9.

 

 

This product should be used only with the components

supplied or; a cart ,rack, or stand that is recommended by the
manufacturer. If a cart, rack, or stand is used, please observe all
safety markings and instructions that accompany the accessory
product.

 

10.

 

  The power supply cord (plug) should be disconnected from

the outlet when electronic products are to be left unused for
extended periods of time. Cords should also be disconnected when
there is a high probability of lightning and/or electrical storm
activity.

 

11.

 

  Care should be taken that objects do not fall and liquids are

not spilled into the enclosure through any openings that may exist.

 

12.

 

  Electrical/electronic products should be serviced by a

qualified service person when:

a. The power supply cord has been damaged; or
b. Objects have fallen, been inserted, or liquids have been

spilled into the enclosure through openings; or

c. The product has been exposed to rain; or
d. The product does not operate, exhibits a marked change

in performance; or

e. The product has been dropped, or the enclosure of the

product has been damaged. 

 

13. 

 

This product, either alone or in combination with an amplifier

and headphones or speaker/s, may be capable of producing sound
levels that could cause permanent hearing loss. DO NOT operate
for a long period of time at a high volume level or at a level that is
uncomfortable. If you experience any hearing loss or ringing in the
ears, you should consult an audiologist. 

 

IMPORTANT

 

: The louder the sound, the shorter the time period

before damage occurs.

 

14.

 

  Some Yamaha products may have benches and/or

accessory mounting fixtures that are either supplied as a part of the
product or as optional accessories. Some of these items are
designed to be dealer assembled or installed. Please make sure
that benches are stable and any optional fixtures (where
applicable) are well secured BEFORE using. Benches supplied by
Yamaha are designed for seating only. No other uses are
recommended.

 

PLEASE KEEP THIS MANUAL

IMPORTANT SAFETY INSTRUCTIONS

 

92-469-3

Содержание MOTIF6 Voice Editor













































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MOTIF6 Voice Editor

Adobe Acrobat 7.0.5 Manual preview
Acrobat 7.0.5
Бренд: Adobe Страницы: 122
Lexmark LexPrint User Manual preview
LexPrint
Бренд: Lexmark Страницы: 20
Ricoh GlobalScan NX Server 5/Server 32/Server 750 Manual preview
GlobalScan NX Server 5/Server 32/Server 750
Бренд: Ricoh Страницы: 6
ICP ICP Controller Using Manual preview
ICP Controller
Бренд: ICP Страницы: 16
Sybase Adaptive Server Anywhere SNMP Extension Agent User Manual preview
Adaptive Server Anywhere SNMP Extension Agent
Бренд: Sybase Страницы: 70
Qlogic SANbox-8 User Manual preview
SANbox-8
Бренд: Qlogic Страницы: 180
Savin RW-470 Clients Installation Manual preview
RW-470 Clients
Бренд: Savin Страницы: 71
Nortel CallPilot 5.0 Quick Start Manual preview
CallPilot 5.0
Бренд: Nortel Страницы: 66
Kenwood MediaManager Installation Manual preview
MediaManager
Бренд: Kenwood Страницы: 40
Yamaha DM2000 V2.1 Supplementary Manual preview
DM2000 V2.1
Бренд: Yamaha Страницы: 4
Yamaha ASIO DirectKS Owner'S Manual preview
ASIO DirectKS
Бренд: Yamaha Страницы: 6
Yamaha Audio Owner'S Manual preview
Audio
Бренд: Yamaha Страницы: 7
Yamaha Arp Owner'S Manual preview
Arp
Бренд: Yamaha Страницы: 9
Yamaha AE041 Owner'S Manual preview
AE041
Бренд: Yamaha Страницы: 11
Yamaha Card Filer Manual preview
Card Filer
Бренд: Yamaha Страницы: 15
Yamaha Add-On Effects Manual preview
Add-On Effects
Бренд: Yamaha Страницы: 14
Yamaha AN200 Editor Manual preview
AN200 Editor
Бренд: Yamaha Страницы: 72
Yamaha 03DVEK Owner'S Manual preview
03DVEK
Бренд: Yamaha Страницы: 129

Бренды по названию

Популярные бренды

Загрузить еще бренды