manualshive.com logo in svg

Yamaha MORPHOUS CP250X 2007, Руководство пользователя, Страница: 64 / 106

Поделиться
Скачать
Yamaha MORPHOUS CP250X 2007 Скачать руководство пользователя страница 64

 

PERIODIC MAINTENANCE AND MINOR REPAIR

 

6-22

 

1

2

3

4

5

6

7

8

9

 

4. Remove the air filter case cover by

removing the screws.

5. Remove the screw, and then pull

the air filter element out.

6. Insert a new air filter element into

the air filter case, and then install
the screw.

7. Install the air filter case cover by in-

stalling the screws.

8. Place the storage compartment in

its original position, and then install
the bolts.

9. Close the seat.

CAUTION:

 

 ECA10480

 

●

 

Make sure that the air filter ele-
ment is properly seated in the
air filter case.

 

●

 

The engine should never be op-
erated without the air filter ele-

ment installed, otherwise the
piston(s) and/or cylinder(s) may

 

become excessively worn.

To clean the air filter check hoses

 

1. Remove cowling D. (See

page 6-8.)

2. Check the hoses at the bottom of

the air filter case for accumulated
dirt or water.

3. If dirt or water is visible, remove

the hose, clean it, and then install
it.

4. Install the cowling.

 

1. Bolt
2. Storage compartment B

1. Screw
2. Air filter case cover

1

1

2

1

2

 

1. Screw
2. Air filter element

1

2

 

1. Air filter check hose

1

Downloaded from 

ManualsNet.com

 search engine

Содержание MORPHOUS CP250X 2007











































































































Отзывы:

Нет отзывов