Yamaha MORPHOUS CP250X 2007 Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 106

Yamaha MORPHOUS CP250X 2007 Скачать руководство пользователя страница 63

PERIODIC MAINTENANCE AND MINOR REPAIR

6-21

2

3

4

5

6

7

8

9

CAUTION:

ECA10471

●

If coolant is not available, use
distilled water or soft tap water
instead. Do not use hard water
or salt water since it is harmful
to the engine.

●

If water has been used instead
of coolant, replace it with cool-
ant as soon as possible, other-
wise the cooling system will not
be protected against frost and
corrosion.

●

If water has been added to the

coolant, have a Yamaha dealer
check the antifreeze content of
the coolant as soon as possible,
otherwise the effectiveness of

the coolant will be reduced.

WARNING

EWA10380

Never attempt to remove the radiator

cap when the engine is hot.

NOTE:

●

The radiator fan is automatically
switched on or off according to the
coolant temperature in the radia-
tor.

●

If the engine overheats, see page

6-42 for further instructions.

EAU38111

Air filter element and check
hoses and V-belt case air filter
element

The air filter element and the V-belt
case air filter element should be ser-
viced at the intervals specified in the
periodic maintenance and lubrication
chart. Service all air filter elements
more frequently if you are riding in un-
usually wet or dusty areas.

Replacing the air filter element

1. Place the scooter on the center-

stand.

2. Open the seat. (See page 3-10.)
3. Remove storage compartment B

by removing the bolts, and then
pulling it upward.

1. Coolant reservoir cap

Coolant reservoir capacity (up to the
maximum level mark):

0.25 L (0.26 US qt) (0.22 Imp.qt)

1

Downloaded from

search engine

«
...
61
62
63
64
65
...
»

Содержание MORPHOUS CP250X 2007











































































































Отзывы:

Нет отзывов