Yamaha MORPHOUS CP250X 2007 Скачать руководство пользователя страница 30

Страница: 30 / 106

INSTRUMENT AND CONTROL FUNCTIONS

3-12

EAU38140

Helmet holder

The helmet holder is located on the bot-
tom of the seat. A helmet holding cable
is provided under the seat to secure a
helmet to the helmet holder.

To secure a helmet to the helmet
holder

1. Open the seat. (See page 3-10.)
2. Pass one end of the helmet hold-

ing cable through the buckle on the
helmet strap, and then hook both
ends of the helmet holding cable
over the helmet holder as shown.

3. Securely close the seat.

WARNING

EWA10160

Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of con-

trol and possibly an accident.

To release the helmet from the hel-
met holder

Open the seat, remove the helmet
holding cable from the helmet holder
and the helmet, and then close the
seat.

EAU38131

Storage compartments

Storage compartment A

To open the storage compartment
when it is locked, insert the key in the
lock, turn it counterclockwise, and then
slide the opening lever up.
To open the storage compartment
when it is unlocked, simply slide the
opening lever up.

To lock the storage compartment, push
the lid into the original position, insert
the key in the lock, turn it clockwise,
and then remove it.

1. Helmet holding cable
2. Helmet holder

1. Unlock.
2. Opening lever
3. Lid

Downloaded from

ManualsNet.com

search engine

Содержание MORPHOUS CP250X 2007











































































































Результаты поиска

Содержание MORPHOUS CP250X 2007

Отзывы:

Yamaha MORPHOUS CP250X 2007, Руководство пользователя, Страница: 30 / 106

Результаты поиска

Содержание MORPHOUS CP250X 2007

Отзывы: