manualshive.com logo in svg

Yamaha MORPHOUS CP250X 2007, Руководство пользователя, Страница: 59 / 106

Поделиться
Скачать
Yamaha MORPHOUS CP250X 2007 Скачать руководство пользователя страница 59

 

PERIODIC MAINTENANCE AND MINOR REPAIR

 

6-17

 

2

3

4

5

6

7

8

9

 

4. Check the washer for damage and

replace it if necessary.

NOTE:

 

Skip steps 5–7 if the oil filter element is

 

not being replaced.

5. Remove the oil filter element cover

by removing the bolts.

6. Remove and replace the oil filter

element and O-rings.

CAUTION:

 

 ECA12910

 

When removing the oil filter element
cover, the compression spring will
fall out. Take care not to lose the

 

compression spring.

 

7. Install the compression spring and

oil filter element cover by installing
the bolts, then tightening them to
the specified torque.

 

1. Engine oil drain bolt
2. Washer

2

1

 

1. Bolt
2. Oil filter element cover

2

1

 

1. Oil filter element cover
2. O-ring
3. Compression spring
4. Oil filter element

1

2

3 4

Downloaded from 

ManualsNet.com

 search engine

Содержание MORPHOUS CP250X 2007











































































































Отзывы:

Нет отзывов