Yamaha MORPHOUS CP250X 2007 Скачать руководство пользователя страница 32

Страница: 32 / 106

INSTRUMENT AND CONTROL FUNCTIONS

3-14

CAUTION:

ECA15290

Keep the following points in mind
when using the storage compart-
ments.

●

Since the storage compart-
ments accumulate heat when
exposed to the sun, do not store
anything susceptible to heat in-
side them.

●

To avoid humidity from spread-
ing through the storage com-
partments, wrap wet articles in a
plastic bag before storing them
in the compartments.

●

Since the storage compart-
ments may get wet while the
scooter is being washed, wrap
any articles stored in the com-
partments in a plastic bag.

●

Do not keep anything valuable
or breakable in the storage com-

partments.

WARNING

EWA14220

Do not exceed the following loading
limits:

●

Storage compartment A: 2 kg

(4 lb)

●

Storage compartment B: 2 kg
(4 lb)

●

Storage compartment C: 3 kg
(7 lb)

●

Maximum load for the vehicle:

190 kg (419 lb)

EAU38151

Trunk

WARNING

EWA14230

Improper loading or overloading can
cause loss of control and possibly
an accident or personal injury. See
page 6-24 for important loading and
tire pressure information.

●

Always securely close the trunk
before riding.

●

Do not exceed the load limit of
3 kg (7 lb) for the trunk.

●

Do not exceed the maximum
load of 190 kg (419 lb) for the ve-

hicle.

To open the trunk

1. Insert the key into the lock, and

turn it clockwise.

Downloaded from

ManualsNet.com

search engine

Содержание MORPHOUS CP250X 2007











































































































Результаты поиска

Содержание MORPHOUS CP250X 2007

Отзывы:

Yamaha MORPHOUS CP250X 2007, Руководство пользователя, Страница: 32 / 106

Результаты поиска

Содержание MORPHOUS CP250X 2007

Отзывы: