Yamaha MCX-A10 - MusicCAST Network Audio Player, Руководство пользователя

Страница: 31 / 75

Connecting to the network
32
■
Setting the MusicCAST client IP Address
1.
From the Manual Setup menu, use
u
/
d
to move the cursor to “IP Address” and
press SELECT.
The IP Address screen appears on the display.
2.
Press SELECT.
The cursor enters the IP address setting field.
Note
• This setting is only valid when the
MusicCAST client is not set to act as a DHCP
client (see page 31 for an explanation of how
to do this).
3.
Use
u
/
d
to select the desired 3 digit IP
number, then press
j
/
i
to move to the
next number to set.
4.
When you have set all four numbers,
press SELECT to confirm the setting.
The cursor returns to the left of the IP address
setting field.
5.
If you are satisfied with the settings you
have made, move the cursor to “Save &
Network restart” and press SELECT.
This confirms the settings and restarts the
network hardware on the MusicCAST client,
returning the display to the Network menu.
Alternatively, select “Cancel” to exit from the
menu without saving and confirmation.
SELECT
[ 0. 0. 0. 0]
Save & Network restart
Cancel
IP Address
SELECT
[ 0. 0. 0. 0]
Save & Network restart
Cancel
IP Address
SELECT
[ 0. 0. 0. 0]
Save & Network restart
Cancel
IP Address
■
Setting the MusicCAST server Server ID
1.
From the Manual Setup menu, use
u
/
d
to move the cursor to “Server ID” and
press SELECT.
The Server ID screen appears on the display.
2.
Press SELECT.
The cursor enters the Server ID setting field.
You need to enter the same address here as your
MusicCAST server has set as its Server ID. See
page 112 in the MCX-1000 owner’s manual for
an explanation of how to view the Server ID of
your MusicCAST server.
3.
Use
u
/
d
to select the desired
character, then press
j
/
i
to move the
cursor to the left or right.
4.
When you finish entering the ID, press
SELECT to confirm the setting.
The cursor returns to the left of the Server ID
setting field.
5.
If you are satisfied with the settings you
have made, move the cursor to “Save &
Network restart” and press SELECT.
This confirms the settings and restarts the
network hardware on the MusicCAST client.
Alternatively, select “Cancel” to exit from the
menu without saving and confirmation.
SELECT
[SV-0001]
Save & Network restart
Cancel
Server ID
SELECT
[SV-0001]
Save & Network restart
Cancel
Server ID
SELECT
[SV-0001]
Save & Network restart
Cancel
Server ID
102_Musiccast_E.p65 2003.06.28, 19:02 32