Setting up the MusicCAST c
lient
Connecting to the network
31
■
Setting your MusicCAST client to act as
a DHCP client
If you set your MusicCAST client to act as a DHCP
client, it automatically receives a new IP address
from the network DHCP server each time you turn
it on. This is useful if you do not want to pre-set an
IP address for each MusicCAST client in your
system. The MusicCAST client is set to be a DHCP
client by default.
Notes
• The MusicCAST client must be connected to a
network with an active DHCP server if you wish it
to act as a DHCP. The MusicCAST server can act
as a DHCP server if you set it to so. See page 110
in the MCX-1000 owner’s manual for more
information.
• If you are using a DHCP server other than the
MusicCAST server when using the MusicCAST
client as a DHCP client, you may sometimes need
to reset the IP address the MusicCAST client is
receiving from the DHCP server. Stop all activity
on MusicCAST clients while doing this. For more
information see the section of your DHCP server’s
owner’s manual that deals with the expiration of
IP addresses.
1.
From the Network Menu, use
u
/
d
to
move the cursor to “Manual Setup” and
press SELECT.
The Manual Setup screen appears on the
display.
2.
Use
u
/
d
to scroll the menu to “DHCP”
and press SELECT.
The DHCP screen appears on the display.
SELECT
Manual Setup
Mode
Server ID
DHCP
IP Address
Subnet Mask
SELECT
DHCP
OFF
ON
3.
Use
u
/
d
to scroll the cursor to the
appropriate setting and press SELECT.
OFF:
The MusicCAST client does not act
as a DHCP client and only uses a
preset IP.
ON:
The MusicCAST client attempts to
use DHCP to obtain a new IP
address from the MusicCAST server
each time you switch it on.
102_Musiccast_E.p65
2003.06.28, 19:02
31
Содержание MCX-A10 - MusicCAST Network Audio Player
Страница 1: ...DIGITAL AUDIO TERMINAL MCX A10 ...
