M7CL
Quick Start Guide Part 1
14
Naming Channels.
Input channel faders are named using tape and pen in the “analog” way. All channels have an electronic name and
icon that will appear on the screen when the channel is assigned to the Centralogic™ screen.
Tip;
Tip;
You may consider the electronic names unnecessary if you use tape and pen, but they are useful as they are
remembered in the session fi le and will be transferred to other consoles when you load. Then write new tape and
pen labels from the electronic source.
The channel nominal light.
(Fader is at 0dB when green)
Icon
Name (max. 8 characters);
The default Scene 000 names the input chan-
nels with ch N and uses the dynamic mic icon.
The outputs are named in a similar generic
fashion but note the prepatched effect sends
and returns are labelled as FX.
The selected channel
Press the grey channel name button
to open the PATCH/NAME pop-up.
Icon popup
Name popup
Use the on-screen keyboard to name the channel.
Tip;
Tip;
Press the [ICON] or the [ICON] tab to change to the ICON page. Choose an ICON and then choose a
SAMPLE NAME. These names can then be edited by pressing the name or the [NAME] tab to return to the
keyboard on the NAME page.
