M7CL
Quick Start Guide Part 1
16
Patching, routing channels. The default Patch, Scene 000.
It is important to understand that unlike an analog console the sockets (Inputs with preamp) on the back are not
permanently wired to the channels on the surface. There is an assignable “soft patch” between the sockets and the
channels. This permits great fl exibility but must be used with great care to avoid confusion.
In M7CL-48/32 the default Scene 000 has all the mono inputs routed one
to one.
Note;
Note;
the STEREO channels have input sockets and preamps, but these
are not patched to the channels; the STEREO channels are patched from
the effects returns.
In M7CL-48ES, when the auto confi gure mode is used (no custom EtherSound
patching using the AVS-ES Monitor PC application) the default Scene 000 has
all the mono inputs similarly routed one to one.
Note;
Note;
the rear panel mic input XLRs are not routed to desk channels.
Default output patches for
Scene 000.
Tip;
Tip;
In Scene 000 the stereo master L&R
always come from the last two sockets in a
unit; Omni 15&16 in M7CL48/32 or Omni 7&8
in M7CL-48ES and SB168-ES.
