manualshive.com logo in svg

Yamaha Grizzly YFM125GW, Руководство пользователя

Поделиться
Скачать
Yamaha Grizzly YFM125GW Скачать руководство пользователя страница 67

 

7-21

 

1

2

3

4

5

6

7

8

9

10

11

 

RIDING DOWNHILL

 

When riding your ATV downhill, shift your weight
as far to the rear and uphill side of the ATV as pos-
sible. Move back on the seat and sit with your arms
straight. Improper braking may cause a loss of
traction.
Use caution while descending a hill with loose or
slippery surfaces. Braking ability and traction may
be adversely affected by these surfaces. Improper
braking may also cause a loss of traction.
Whenever possible, ride your ATV straight down-
hill. Avoid sharp angles which could allow the ATV
to tip or roll over. Carefully choose your path and
ride no faster than you will be able to react to ob-

stacles which may appear.

 

EWB01130 

WARNING

 

POTENTIAL HAZARD
Going down a hill improperly.
WHAT CAN HAPPEN
Could cause loss of control or cause the ATV
to overturn.
HOW TO AVOID THE HAZARD
Always follow proper procedures for going
down hills as described in this Owner’s Man-
ual.
Note: a special technique is required when
braking as you go down a hill.
Always check the terrain carefully before you
start down any hill.
Shift your weight backward.
Never go down a hill at high speed.
Avoid going down a hill at an angle that
would cause the ATV to lean sharply to one
side. Go straight down the hill where possi-
ble.

Содержание Grizzly YFM125GW



















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды