Yamaha Grizzly YFM125GW Скачать руководство пользователя страница 117

Страница: 117 / 146

8-43

CAUTION:

ECB00600

Do not leave or store the battery on its side.

3. If the battery will be stored for more than two

months, check the specific gravity of the elec-
trolyte at least once a month and fully charge
the battery whenever necessary.

To install the battery

NOTE:

Be sure the battery is fully charged.

1. Install the battery.
2. Connect the positive lead first, and then con-

nect the negative lead.

3. Make sure that the breather hose is properly

routed, in good condition, and not obstructed.

CAUTION:

ECB00610

If the breather hose is positioned in such a way
that the frame is exposed to electrolyte or gas
expelled from the battery, the frame could suf-

fer structural and external damages.

1. Battery
2. Negative lead
3. Positive lead

Содержание Grizzly YFM125GW



















































































































































Результаты поиска

Содержание Grizzly YFM125GW

Отзывы:

Бренды по названию

Популярные бренды

Yamaha Grizzly YFM125GW, Руководство пользователя

Результаты поиска

Содержание Grizzly YFM125GW

Отзывы:

Бренды по названию

Популярные бренды