manualshive.com logo in svg

Yamaha Grizzly YFM125GW, Руководство пользователя

Поделиться
Скачать
Yamaha Grizzly YFM125GW Скачать руководство пользователя страница 106

 

8-32

 

1

2

3

4

5

6

7

8

9

10

11

 

EWB02020 

EBU24481

 

Adjusting the rear brake lever free play 

 

The brake lever free play must be checked and, if
necessary, adjusted at the intervals specified in
the periodic maintenance and lubrication chart.

NOTE:

 

Before adjusting the brake lever free play, check

 

the rear brake shoes for wear.

The brake lever free play should measure 5.0–8.0
mm (0.20–0.31 in) as shown. If the free play is in-
correct, adjust it as follows.

Turn the brake lever free play adjusting nut on the
rear wheel hub in direction (a) to increase the free
play, and in direction (b) to decrease it.
If the correct free play cannot be obtained, have a
Yamaha dealer adjust it.

WARNING

 

POTENTIAL HAZARD
Operating with improperly serviced or ad-
justed brakes.
WHAT CAN HAPPEN
You could lose braking ability, which could
lead to an accident.
HOW TO AVOID THE HAZARD
After servicing:

 

●

 

Make sure the brakes operate smoothly
and that the free play is correct.

 

●

 

Make sure the brakes do not drag.

Replacement of brake components requires
professional knowledge. These procedures
should be performed by a Yamaha dealer.

 

1.  Brake lever free play

1

Содержание Grizzly YFM125GW



















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды