manualshive.com logo in svg

Yamaha Grizzly YFM125GW, Руководство пользователя

Поделиться
Скачать
Yamaha Grizzly YFM125GW Скачать руководство пользователя страница 52

 

7-6

 

1

2

3

4

5

6

7

8

9

10

11

 

Do not operate after consuming alcohol or
drugs.

 

The operator’s performance capability is reduced
by the influence of alcohol or drugs.

 

EWB00930 

 

Pre-operation checks

 

Always perform the pre-operation checks listed on
page 5-1 before riding for proper care of the ATV
and to ensure safety.

 

EWB00940 

WARNING

 

POTENTIAL HAZARD
Operating this ATV after consuming alcohol
or drugs.
WHAT CAN HAPPEN
Could seriously affect your judgment.
Could cause you to react more slowly.
Could affect your balance and perception.
Could result in an accident.

 

HOW TO AVOID THE HAZARD
Never consume alcohol or drugs before or
while driving this ATV.

WARNING

 

POTENTIAL HAZARD
Failure to inspect the ATV before operating.
Failure to properly maintain the ATV.
WHAT CAN HAPPEN
Increases the possibility of an accident or
equipment damage.
HOW TO AVOID THE HAZARD
Always inspect your ATV each time you use
it to make sure the ATV is in safe operating
condition.
Always follow the inspection and mainte-
nance procedures and schedules described
in the Owner’s Manual.

Содержание Grizzly YFM125GW



















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды