Yamaha GP1300R WaveRunner 2007 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 98

background image

Safety information

16

EJU30890

Watercraft characteristics

●

Jet thrust turns the watercraft. Releasing
the throttle lever completely produces only
minimum thrust. If you are traveling at
speeds above trolling, you will have rapidly
decreasing ability to steer without throttle.
This model is equipped with the Yamaha
Engine Management System (YEMS) that
includes an off-throttle steering (OTS) sys-
tem. It will activate at planing speeds should
you attempt to steer the watercraft after re-
leasing the throttle lever. The OTS system
assists in turning by continuing to supply
some thrust while the watercraft is deceler-
ating, but you can turn more sharply if you
apply throttle while turning the handlebars.
The OTS system does not function below
planing speeds or when the engine is off.
Once the engine slows down, the watercraft
will no longer turn in response to handlebar
input until you apply throttle again or you
reach trolling speed.
Practice turning in an open area without ob-
stacles until you have a good feel for this
maneuver.

●

This watercraft is water-jet propelled. The
jet pump is directly connected to the engine.
This means that jet thrust will produce some
movement whenever the engine is running.
There is no “neutral” position.

●

Keep away from the intake grate while the
engine is on. Items such as long hair, loose
clothing, or PFD straps can become entan-
gled in moving parts, resulting in severe in-
jury or drowning.

●

Never insert any object into the jet thrust
nozzle while the engine is running. Severe
injury or death could result from coming in

contact with the rotating parts of the jet
pump.

●

Stop the engine and remove the clip from
the engine shut-off switch before removing
any debris or weeds, which may have col-
lected around the jet intake.

1

Intake grate

2

Jet thrust nozzle

1

Clip

2

Engine shut-off switch

UF1G14E0.book Page 16 Friday, July 28, 2006 1:06 PM

«
...
19
20
21
22
23
...
»

Содержание GP1300R WaveRunner 2007



































































































Отзывы:

Нет отзывов

Похожие инструкции для GP1300R WaveRunner 2007

Bavaria 37 2017 Jitterbug

Бренд: Horizon Yacht Charters Страницы: 27

Бренд: Ockelbo Страницы: 64

CAP CAMARAT 925 WA

Бренд: Jeanneau Страницы: 86

SUN ODYSSEY 44I

Бренд: Jeanneau Страницы: 138

Бренд: Old Town Canoe Co. Страницы: 14

Бренд: Ranger Страницы: 78

Бренд: Grady-White Страницы: 78

Бренд: Grady-White Страницы: 102

Бренд: Laser Performance Страницы: 11

Бренд: Malibu Boats Страницы: 309

Бренд: Access Dinghy Страницы: 27

Бренд: Nautiraid Страницы: 8

Бренд: Quicksilver Страницы: 51

Бренд: Zodiac Страницы: 35

Бренд: Kangui SURF Страницы: 20

Hard Fabric Line

Бренд: SEVEN BASS DESIGN Страницы: 4

Бренд: Four winns Страницы: 128

X-412 MKII MODERN

Бренд: X-Yachts Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды