Yamaha GP1300R WaveRunner 2007 Скачать руководство пользователя страница 74 | Manualshive

Страница: 74 / 98

background image

Maintenance and care

69

EJU33751

Maintenance and adjustments

Periodic inspection, adjustment, and lubrica-
tion will keep your watercraft in the safest and
most efficient condition possible. Safety is an
obligation of the watercraft owner. Proper
maintenance must be carried out to keep the
exhaust emission and sound levels within the
regulated limits. The most important points of
watercraft inspection, adjustment, and lubri-
cation are explained on the following pages.
See a Yamaha dealer for genuine Yamaha re-
placement parts and optional accessories de-
signed for your watercraft.
Remember, failures that are the result of the
installation of parts or accessories which are
not qualitatively equivalent to genuine
Yamaha parts are not covered by the limited
warranty.

Maintenance, replacement, or repair of the
emission control devices and system may
be performed by any marine SI engine re-
pair establishment or individual. Warranty
repair, however, must be performed at an
authorized Yamaha marine dealership.

WARNING

EWJ00310

●

Be sure to shut the engine off when you
perform maintenance unless otherwise
specified, otherwise an accident or inju-
ry could result from unexpected opera-
tion, moving parts, or electric shock. If
the owner is not familiar with watercraft
servicing, this work should be done by a
Yamaha dealer. Improperly serviced
components could fail or stop operating
correctly, which could result in an acci-
dent.

●

Modifications to this watercraft not ap-
proved by Yamaha may cause loss of
performance or excessive noise and ex-
haust emissions, or render it unsafe for

use. Consult a Yamaha dealer before at-
tempting any modifications.

NOTE:

A service manual is available for purchase
through a Yamaha dealer for owners who
have the mechanical skills, tools, and other
equipment necessary to perform mainte-
nance not covered by this owner’s/operator’s
manual.

EJU33800

Owner’s/operator’s manual and tool
kit

It is advisable to always carry the owner’s/op-
erator’s manual and tool kit with you whenev-
er you use the watercraft. For your
convenience, a storage compartment is pro-
vided on the watercraft for the manual and
tool kit.

NOTE:

To protect these materials from water dam-
age, it would be a good idea to put them in a
waterproof bag. If your owner’s/operator’s
manual is damaged, order a replacement
from a Yamaha dealer.

The service information included in this man-
ual is intended to provide you, the owner, with
the necessary information for completing your
own preventive maintenance and minor re-

1

Storage compartment

UF1G14E0.book Page 69 Friday, July 28, 2006 1:06 PM

«
...
72
73
74
75
76
...
»

Содержание GP1300R WaveRunner 2007



































































































Отзывы:

Нет отзывов

Похожие инструкции для GP1300R WaveRunner 2007

Бренд: MasterCraft Страницы: 41

Invitation Triss Racer

Бренд: BOMBARDIER Страницы: 23

Бренд: Boston Whaler Страницы: 106

Бренд: Nauticstar Страницы: 82

Бренд: GALA Страницы: 10

Бренд: Bavaria Страницы: 77

Бренд: Malibu Boats Страницы: 56

Бренд: Malibu Boats Страницы: 112

Бренд: Access Dinghies Страницы: 4

Packraft FamilyRaft

Бренд: Nortik Страницы: 9

Бренд: Nortik Страницы: 11

Бренд: Nortik Страницы: 29

Performance H2X

Бренд: Baja Страницы: 83

Бренд: DE WIT WORKBOATS Страницы: 42

Бренд: Sailfish Страницы: 37

Бренд: Quicksilver Страницы: 87

Бренд: Jeanneau Страницы: 9

Бренд: Carver Yachts Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды