Yamaha FZR400 1988-1989, Руководство по обслуживанию

Страница: 302 / 477

CHECKING OF SWITCHES
NOTE:
Use thin probes for checking the continuity.
Otherwise, the probes may contact other
inside the coupler.
*Check the continuity between “R” and
at the respective switch positions of “ON”
“OFF”
“LOCK” and “P”
There must be continuity (the tester
ing “0”) at the “ON” switch position, and
there must be no continuity (the tester indicat-
ing at “OFF”, “LOCK”, or There
is something wrong between “R” and
if there is no continuity at the “‘ON” position
or if there is some continuity either at the
“OFF” or “LOCK” or “P”.
NOTE:
Check the switch for continuity several times.
Next go on to checking of the continuity be-
tween and and L/R”, and
“R and L/R” at the respective switch posi-
tions, as in the same manner mentioned
above.
6. If there is something wrong with any one of
the combinations, replace the switch com-
ponent.