Yamaha FZR400 1988-1989, Руководство по обслуживанию

Страница: 349 / 477

SIGNAL SYSTEM
- -
) Turn the main switch to “ON”.
brake lever is pulled in or brake pedal
is stepped down.
for voltage o n t h e “ Y e l l o w ”
lead at the bulb socket connector.
J
OUT OF SPECIFICATION
SPECIFICATION
This circuit is good.
4. Wiring connection
1
Check the entire signal system for
connections.
Refer to the “WIRING
section.
3. Flasher light and/or “TURN” indicator light do not blink.
??
Check the bulb and bulb socket for
a
CONTINUITY
2. “TURN” switch
??
Disconnect the handlebar switch coupler
from the wire harness.
the switch component for the conti-
n u i t y b e t w e e n “ B r o w n / W h i t e
a n d
C h o c o l a t e a n d “ B r o w n / W h i t e
and Dark green Refer to the “CHECK-
ING OF SWITCHES” section.
CORRECT
INCORRECT
Replace handlebar switch (Left).
8-56