Yamaha FZ 25 2021 Скачать руководство пользователя страница 206

Страница: 206 / 247

6-76

–

ELEC

ABS (ANTI-LOCK BRAKE SYSTEM)

EAS30530

BASIC PROCESS FOR TROUBLESHOOTING

[A]

Turn the main switch to “ON”,
and check the ABS warning
light.

[A-3] The ABS warning light

comes on.
Connect the Yamaha
diagnostic tool, and then
execute functional diagnosis.
Can the tool communicate
with the ABS ECU?

[B-1] Check for ABS fault codes in

the screen for the Yamaha
diagnostic tool.
Execute fault diagnosis.
Are fault codes displayed on
the screen?

[C-1] Perform the final checks.

Were all of the final checks
completed normally?

Finished.

[A-1] Does only the ABS

warning light fail to
come on?

[A-2] Do all indicator lights

fail to come on?

[A-4] Only the ABS ECU

fails to communicate.

[A-5] ABS ECU and FI ECU

fail to communicate.

[B-2] Diagnose by the fault

code.

The reaction force generated
during brake line routing
confirmation is incorrect.
• The brake hoses and brake

pipes are not connected
correctly.

The ABS warning light does
not go off when the light is
checked.
• The malfunction is not

corrected.

• There is a break in the wire

harness between the ABS
ECU and the meter
assembly.

• The meter assembly circuit is

defective.

• The ABS warning light circuit

in the hydraulic unit
assembly is defective.

• The ABS warning light (LED) is

defective.

• The wire harness is grounded

between the ABS ECU and the
meter assembly.

• The meter assembly circuit is

defective.

• The hydraulic unit assembly is

defective.

• The main switch is defective.
• The battery voltage is low.
• The main fuse is blown.
• The meter assembly circuit is

defective.

• The ABS control unit fuse is

blown.

• The ABS ECU coupler is

disconnected.

• The wire harness is defective.
• The hydraulic unit assembly is

defective.

• The connection with the Yamaha

diagnostic tool is defective.

• The wire harness is defective.

[B-3] Delete the fault codes.

Return to [A].

Yes
(Check that the ABS warning
light goes off during the ABS
warning light check.)

Yes

Can communicate

Comes on

Cannot
communicate

Fails to
come on

Yes

B9X-F8197-E0.book Page 76 Thursday, July 16, 2020 2:28 PM

Содержание FZ 25 2021
























































































































































































































































Результаты поиска

Содержание FZ 25 2021

Отзывы:

Похожие инструкции для FZ 25 2021

Бренды по названию

Популярные бренды

Yamaha FZ 25 2021, Дополнительное руководство по обслуживанию

Результаты поиска

Содержание FZ 25 2021

Отзывы:

Похожие инструкции для FZ 25 2021

Бренды по названию

Популярные бренды