FGDP-50 User Guide
69
SectionChange
Abbreviation for Section Change Timing.
This sets the timing for switching to the next section when
section switching is executed during session playback. The
number of times an RGB Square Pad ([2 INTRO/ENDING] to [6
MAIN D]) for the section to be switched to is hit determines
the operation as described below.
Immediate
Hit one time to switch immediately.
Bar&Imm
Hit one time to switch at the end of the current measure, and
two times to switch immediately.
Sec&Imm
Hit one time to switch at the end of the last measure of the
current section, and two times to switch immediately.
Sec&Bar&Imm
Hit one time to switch at the end of the last measure of the
current section, two times to switch at the end of the current
measure, and three times to switch immediately.
Sec&Bar&Imm
@
Settings related to various configurations when switching sessions
Item
(Display)
Description and Setting Range/Default Setting
LockSetting
This sets whether the individual kit/tempo/section/part settings are changed or
maintained (locked) when switching sessions. Press the [ENTER] button to move
to the menu level that displays the lock targets. Then, use the [<] and [>] buttons to
select the lock targets, and use the [+] and [-] buttons to set them.
Lock Target
(Display)
Setting Range
Default Setting
Kit
Reset, Hold, Lock
Reset
Tempo
Reset, Hold, Lock
Reset
Section
Reset, Hold, Lock
Reset
PartOnOff
Reset, Hold, Lock
Reset
Lock Target
