FGDP-50 User Guide
115
Default settings
•
Kit Mode: Varies by Kit
•
Session Creator Mode: NoAssign for both A1 and A8
Threshold
Sets the threshold, in the range of 1
–
127, for the strength required when pressing a
Pad further to trigger the function set in “Function.” The higher the value is set, the
harder the Pad must be pressed further.
Default settings:
•
Kit Mode: Varies by Kit
•
Session Creator Mode: 40
Gain
If the item
s from “Volume” to “SessRetrigger” (functions in which the size of the
effect changes depending on how hard the Pad is pressed further) are set in
“Function,” the sizes of those effects are set by multiplying those values by the
value for this setting. The setting range is 1/16, 1/8, 1/4, 1/2, 1, 2, 4, 8, and 16. The
larger the value, the greater the effect.
Default settings:
•
Kit Mode: Varies by Kit
•
Session Creator Mode: 1
Setting
Configure this setting if “Volume”–“VarSend”, “Tempo,” or “ControlChange” is
selected for “Function.”
When “Volume”–“VarSend” is selected for “Function”
Set how the effect for each item is applied while the designated Pad is pressed
further, for each of the following parts.
Target Part
(Display)
Description
Setting Range
Voice
Voice for the designated Pad
When Function
is set to Pan:
Off, Left, Right
When Function
is set to a value
other than Pan:
Off, Down, Up
Kit
All Pad sounds
Drum
Part in a session
Bass
Part in a session
Other1
Part in a session
Other2
Part in a session
Other3
Part in a session
