FGDP-50 User Guide
71
[REG] Registration Memory
You can register a variety of settings to these buttons, and then call them up at any time
with a single touch. This is called the Registration Memory function. Registered settings
can be saved to a Registration Memory Bank of four buttons.
Lamp states of the Registration Memory buttons
For the [I]–[IV] buttons, the lamp state indicates the registration state of the setting
described below.
•
Off: No setting is registered for this button.
•
Blue: A setting is registered for this button.
•
Red: A setting is registered for this button, and it was the last button
registered/triggered.
Red, blinking temporarily: A setting has just been registered for this button.
Registering the current settings in Registration
Memory
1.
Press and hold a button ([I]–[IV]) until the LCD screen indicates that registration is
complete.
