Components
28
EMU26263
Trim rod (tilt pin)
The position of the trim rod determines the
minimum trim angle of the outboard motor in
relation to the transom.
EMU26313
Tilt lock mechanism
The tilt lock mechanism is used to prevent
the outboard motor from lifting out of the wa-
ter when in reverse gear.
To lock it, set the tilt lock lever in the “
”
(lock) position. To release, push the tilt lock
lever in the “ ” (release) position.
EMU34462
Tilt support lever for power trim and
tilt or hydro tilt model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
clamp bracket.
ECM00661
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be
trailered in the normal running position,
use an additional support device to se-
2. Bolt
3. Cap
1. Trim tab
2. Bolt
Bolt tightening torque:
18 N·m (1.8 kgf·m, 13 lb·ft)
(F40H, F50H, F60F)
37 N·m (3.7 kgf·m, 27 lb·ft)
(F40G, FT50J, FT60G, F70A)
A
B
ZMU03097
1
2
ZMU03593
1. Tilt lock lever
1
ZMU03594
ZMU03595
6C1-9-7J-1E0.book 28 ページ ２０１９年１０月３０日 水曜日 午後２時５６分
